Page 91 - HINDLEYS CATALOGUE 2018

PLASTIC DIP COATING
Fluidised Baths
All fluidised baths will require an air supply.
INJECTION MOULDING
MACHINE
Provides a clear demonstration of injection moulding principles, whilst producing dense, production quality mouldings up to 20g Incorporating:
• Temperature controlled heating barrel
• Rack & pinion ram
• Over-centre mould closing system
• Automatic product releasing system
• Calibrated ram to assist in determining product volumes
• Supplied with 2kg of Polyethylene granules
CLA1004
Model 25
£1660.00
HOT WIRE CUTTER 280
Expanded thermoplastic materials can be cut using a hot wire – melting the material which then shrinks and clears a path for the wire to advance.
Operational features include:
• 635mm (25") throat depth.
• Fully adjustable work guides for accurate
material referencing
• Robust and stable polyethylene work table
• Protractor fitted to hot wire bow for
accurate setting of angles, chamfers
and cones
• Stepless variable temperature for heating
wire and sculptor tool
• Foot switch activator virtually eliminates
fumes from any residue left on the heating wire
CLA0047
Model 280
£573.00
Nichrome wire
CLA0011
900/31 25Swg 10m
£19.31
CLA0012
900/52 20Swg 10m
£23.86
Model 300
Freestanding unit with an integral plenum box and 50 litre static volume. Porous membrane allows low pressure high volume air into the bath, but also forms a barrier to prevent powder entering the air chamber below. A 20kg bag of powder is sufficient for the initial fill, leaving a small surplus for topping up.
CLA0003
£252.00
Model 150
Smaller unit designed to locate on top of Model 300. Quick acting clamps secure the unit and it can be used anytime irrespective of the contents in the lower 300 tank. 5 litres static volume.
CLA0004
£137.00
Blower Suction Unit 120
This will provide low pressure, high volume air suitable for fluidised baths,. With variable speed control and identical inlet and outlet stubs 1" dia. it is connected via a hose. Centrifugal two stage blower.
CLA0001
£519.00
Model 300S Stand
Mobile stand suitable for Models 300, 150 and 120.
CLA0046
£137.00
Dip Coating Powder
Polyethylene per 5kg.
CLA0100
Black
£43.00
CLA0101
White
£43.00
CLA0102
Blue
£43.00
CLA0103
Red
£43.00
OVENS
The 200FD and 400FD Fan Circulated Ovens are compact and suitable for pre-drying, heating of thermoplastic materials and heating of objects for dip coating. Optional mobile stands.
Operational features include:
• 50mm (2") thermal insulating ceramic blanket and ceramic fibre and woven glass door seals
• Asbestos free
• No volt release, mains indicators and
overload protection
• Inconel sheathed element (fully guarded)
heats to a maximum temperature of 350°C max recommended working temperature of 300°C (572°F)
• Hinges and door lock are adjustable to maintain seal pressure
• Digital set temperature controller
• Two wire grid shelves
200FD
CLA0010
508 x 355 x 304mm
£1322.00
200S
CLA0008
Stand
£231.00
400FD
CLA0014
762 x 762 x 304mm
£3198.00
400S
CLA0015
Stand
£338.00
HOT WIRE CUTTING
Triform 180
• The ‘Triform’ 180 cuts & sculpts expanded TP (such as ‘‘Polystyrene’’ or ‘Styrofoam’ ) and bends sheet TP up to
6mm thick: 180mm (7") cutting height
• 300mm (12.5") bending length
• 480mm (20") throat depth
• Work table calibrated in metric
& imperial units
• 4 bow angles
• Sculptor tool
• Foot switch virtually eliminates fumes
• Bends material up to 6mm thick
CLA0009
Model 180
£503.00
CARRIAGE EXTRA www.hindleys.com 91
MACHINERY