Page 90 - HINDLEYS CATALOGUE 2018

MACHINES
HOT WIRE STRIP HEATERS
These machines are the simplest strip heaters, with a single, guarded heating wire and one power setting. Working lengths are 500mm and 920mm and the machines are suitable for heating materials from 1-5mm in thickness.
CLA0071
Model 500
£329.00
CLA0072
Model 920
£497.00
This new range of machines offers single-sided heating with the benefit of twin heating wires. The working lengths of the machines are 600mm, 1000mm and 1500mm. Wires are adjustable for height and spacing allowing materials of up to 8mm in thickness to be processed. The hinged clamp beam holds the material in position during the heating cycle. A calibrated workstop makes set up quick and easy.
CLA0070
Model 600S
£474.00
CLA0006
Model 1000S
£705.00
CLA0064
Model 1500S
£1089.00
These machines are identical to the 'S' range above but with the addition of upper heating wires in the clamp beam. This reduces heating times by up to 50% and works best on materials of 3mm thick and above with a maximum thickness of 10mm.
CLA0076
Model 600D
£735.00
CLA0077 CLA0078
Model 1000D Model 1500D
£1013.00 £1476.00
145 PROFILE ROUTER
The Profile Router 145 trims light gauge vacuum formings up to 3mm (0.125") thick easily, safely & quickly:
• Combined adjustable and robust fence/guard for trimming fine details with or without flanges up to 6mm (0.25") without changing tooling
• Industrial single phase, balanced and fan cooled motor
• Swarf collection duct for connection to an existing extraction unit (not
essential to operation)
• Angled work support table
• Foot switch operated for safety, allowing both hands to control the
work during cutting
CLA0050
Model 145
£678.00
DOME BLOWING UNIT
Material is transferred to the Dome Blowing unit, where it is clamped under a circular ring. Air pressure is applied which blows the material up. The elastic nature of the material forms it into a uniform, hemispherical dome.
Designed for free dome blowing of heated thermoplastic sheet (cast acrylic recommended) using air pressure supplied by one of our vacuum forming machines or from an independent source It is transferred to the Dome Blowing unit, where it is clamped under a circular ring. Air pressure is applied which blows the material up. The elastic nature of the material forms it into a uniform, hemispherical dome.
This unit incorporates:
• 304mm, 225mm & 152mm clamping rings (dome diameters)
• Integral pneumatic valve for blowing process control
• Durable rubber seal plate with air diffuser
• Fully adjustable toggle clamps
• 10mm maximum material thickness
FOLDING JIGS
The Folding Jigs FJ0600/1000/1500
are a useful accessory to our range
of strip heaters. Available in working
lengths of 600mm, 1000mm and
1500mm, the jigs adjustable from 160°
obtuse to 30° acute. The calibrated protractors
ensure consistent setting, with hand knobs for easy adjustment. Adjustable work stops can be used to hold the material into the folding jig, allowing the operator to continue with other work while the folded material cools.
CLA1100
FJ0600
£120.00
CLA1101
FJ1000
£145.00
CLA1102
FJ1500
£169.00
CLA0045
Model 320
£738.00
90  0114 269 1402 CARRIAGE EXTRA
MACHINERY